Trim excess from all sides of the wrap decal as necessary. Make sure to trim enough to prevent the wrap from overlapping when applying to the cup.
PEEL WRAP OFF CARRIER SHEET
For best results, run a squeegee or a rubber scraper over the wrap before peeling it off the carrier sheet. Ensure there are no bubbles in the decal.
STICK ONTO CUP
Start with one side, ensuring the wrap is straight. Press down small sections at a time. Once the wrap touches the glass, it cannot be removed. Cup cradles are very helpful with this process.
RUB THE DECAL
Burnish the decal really well onto the cup. A squeegee is recommended for best results. The more time you spend rubbing the decal with the squeegee, the better the end result will be. Ensure the decal is adhered really well.
PEEL OFF THE CARRIER
Start at one side of the film and peel it off gently. If part of the decal lifts, lay it back down and continue to rub it with your squeegee until it adheres.
* HAND WASH ONLY
* NOT FOR USE IN DISHWASHER OR MICROWAVE
* DO NOT SOAK CUP
* NOT RECOMMENDED FOR CUPS WITH A SUBLIMATION COATING
* DO NOT USE ALCOHOL BEFORE OR AFTER APPLYING WRAP
* NOT ALL GLASS CANS ARE THE SAME SIZE. BE SURE TO MEASURE YOUR CUP AND TRIM IF NECESSARY.
*** GLITTERTHIS CRAFT CO. IS NOT RESPONSIBLE FOR USER ERROR, DAMAGE TO WRAPS WHILE APPLYING, WRAPS NOT FITTING YOUR CUPS, OR DAMAGE FROM WASHING AND NORMAL WEAR & TEAR ***
You may also like